Application area
In the outboard support bearings of wheeled trolleys passing through drying cabinets in an air conditioner factory. The temperature reached 180 ° C / 356 ° F, and repeated lubrication cycles were carried out every 8 months. In the upper sealed bearing of the wheeled conveyor of a trolley passing through an oven in an automobile assembly plant. Temperatures reached 185 ° C / 365 ° F with relubrication cycles every 6 months. In the floor, conveyor bearings pass through ovens at an auto assembly plant. Temperatures of 190 ° C / 374 ° F were achieved with relubrication cycles every 6 months in the outboard support bearings of wheeled trolleys passing through the drying cabinets of the motorcycle assembly plant. After 4 months without relubrication at 180 ° C / 356 ° F, the product ball on the outside of the cart wheel was still soft and pliable. Relubrication cycles were carried out every 6 months in a cement rotary kiln as a gas seal lubricant to minimize leakage of hot gas.
Benefits
- Excellent friction reduction due to Molub-Alloy solid lubricants - easier starting, less heat and less energy leading to longer bearing life;
- Synthetic base fluid and unique thickening system - a combination of synthetic fluids and unique thickening;
- The system provides physical stability during prolonged use at high temperatures. This combination makes the Molub-Alloy 1000 HT more pliable than conventional high-temperature greases, extending bearing life and lubrication cycles and trouble-free service;
- Molub-Alloy 1000 HT is formulated for continuous use from 177 ° C / 350 ° F to 288 ° C / 550 ° F. It also withstands intermittent temperatures up to 343 ° C / 650 °;
- Designed to solve environmental problems - does not contain antimony, barium, lead and zinc.